Used Cushion Tire Forklift Ohio - While forklift trucks are often classified by the type of work they perform under most circumstances, forklift trucks can also be classified by the type of tire they are fitted with. The two types of tire classification for forklifts are:
1. Cushion; and
2. Pneumatic.
When considering the benefits and drawbacks of cushion tires in forklift uses, it is important to discuss the benefits and drawbacks of the other available forklift tire option: the pneumatic tire. The benefits and potential drawbacks of the cushion tire models can only be compared when the pneumatic benefits and drawbacks are equally discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires feature solid rubber that is either smooth or treaded and fixed or positioned around a baseband or metal ring. Cushion tires cost less to make and are easier to take care of. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. These tires are designed to maneuver well within tight locations, due to their specific turning radius. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. However, cushion tires do not provide as much traction as pneumatic tires. This is especially true for outdoor areas and wet surfaces.
There are many jobs suitable for cushion tire forklifts such as unloading shipments, transporting items to and from the loading areas, order picking, unloading inventory and more.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The difference between these two pneumatic categories is that the first is made entirely of rubber, while the latter is a layered rubber, filled with air.
For locations with uneven surfaces and unpaved ground, pneumatic tire forklifts are prime choices. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The type of forklift that utilizes cushion tires are for mainly inside applications with some limited outside use. Cushion tire forklifts are commonly used in warehouses and manufacturing plants. Work which requires forklift operations in tight areas, such as narrow aisles, are ideal for the use of a cushion tire forklift.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Maneuverability is one of the key pneumatic tire forklift benefits since these models do not require a larger frame to facilitate a bigger internal combustion engine.
2) Lower Clearance
Indoor cushion tire forklifts have lower clearance compared to pneumatic models; allowing the machine to travel easier through doorways and around lights or sprinkler obstacles.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Powered by electricity instead of relying on an internal combustion engine enables cushion tire forklifts to make zero dangerous emissions.
Forklift Tire Choice
Most forklift frames only allow for either a cushion tire or a pneumatic tire. Tires and axles are specific to the lifting capacity and the machine’s frame. Forklift manufacturers create models that safely operate with certain tires and wheels, typically pneumatic tires or cushion tires. Instead of trying to modify the forklift by picking the correct tire for a particular application, it is wiser to choose the forklift that will best suit the job at hand.
Workplace Applications
Suitable Work Applications for Cushion Tires
There are many work applications suitable for using cushion tire forklift models. If there is moderate use of the forklift outside on smooth surfaces and the majority of the lifting, loading and transporting will be occurring inside on smooth floors, a cushion tire model is an excellent tool.
Forklifts fitted with cushion tires often have a smaller frame and sit much lower to the ground than forklifts fitted with pneumatic tires. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. However, cushion tire forklifts also have less clearance to the ground which can result in cushion tire forklifts getting easily hung up on outdoor obstacles where the surface is not cleared or even. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. These tires are not recommended for travelling on grass or dirt. Traction tires are utilized on the opposite sides, the steer and drive axles.
One of the top advantages of the cushion forklifts is their tight turning radius. Their ability to work in compact locations makes cushion tire forklifts excellent for warehousing and manufacturing operations. Locations that rely on narrow aisles will benefit greatly from the smaller cushion tire forklifts and their tight turning capabilities. Cushion tire forklifts are more cost-effective and available compared to pneumatic tire models.
Suitable Work Applications for Pneumatic Tire Forklifts
Pneumatic tires forklifts have air in them and are better for outdoor use such as in yard work or on gravel. Pneumatic tires can also be used inside but do not provide the advantages of low clearance, maneuverability or small turning radius. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. With a wider base and longer frame in comparison to cushion tire models, pneumatic tire forklifts are for use mainly outdoors.
The solid pneumatic tire costs more compared to the air pneumatic tire. This is because a solid pneumatic tire is not susceptible to punctures or gouges because they are made of solid rubber and do not have air in them. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Air-filled pneumatic tires work well on gravel and asphalt exterior surfaces. Air-filled pneumatic tires can easily become punctured and their working environment needs to be evaluated carefully. It is essential to ensure the work site is free from any sharp materials before using a forklift with air pneumatic tires. Operator fatigue and discomfort can be traced to the bounciness of air-filled tires. Therefore, many air pneumatic tire forklift users prefer to foam fill their tires. The foam filling option creates a more even ride compared to the solid pneumatic tires or the bounciness of the air-filled pneumatic tires. Flat tires can be filled with foam to keep them more durable and prevent flats. It takes roughly three days to fill and cure an air pneumatic tire with foam.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Lift limits are given for certain electric-powered cushion tire forklifts. However, cushion and pneumatic tire forklifts can basically be obtained with just about any load capacity. These machines come in different load capacities from under 2000 lbs. to over 200,000 lbs. depending on your application.
Cushion Tire Forklift PDF
