In the majority of cases, most individuals spend quite a lot of money buying their lift truck. Thus, it is extremely important to take good care of it so as to protect your investment well into the long run. It is a great idea to know the procedures which are carried out in the maintenance and care of this piece of machine.
Amongst the best ways to tell how good the engine is running is by starting the lift truck up and listening carefully to see how it works. Like for example, if there are any knocks or misses, the machinery is faulty and this should raise several concerns. What's more listen carefully for any squealing noise which come from the belts as these sounds would provide you with a wealth of information.
When carrying out maintenance, several of the main parts you would have to pay attention to comprise the safety warning devices, horn, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty parts have to be replaced as soon as they are noticed. It is also vital to inspect the wiring.
The battery compartment terminals must be cleaned after the above parts have been checked carefully. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery has to be inspected in order to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machinery and after that change the filters. The transmission filter, fuel filters and the hydraulic filter must be replaced regularly. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
When the oil change has been completed and new filters have been fitted, visually check the drive axle from beneath the machine. Be certain to grease the axle if there is any grease fitting. Check the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. Next, check each and every other part of the equipment including the wheels. If any kind of fault or problem is detected, be certain to address it immediately in order to make certain the machine is running at its safest and optimum levels.