Forklifts are vehicles commonly found inside factories, warehouses and various work locations where it is necessary to move heavy materials from one location to another. The mast is the mechanism situated on the front of the forklift that hydraulically raises and lowers the load. The "cat" is the area that is protected where the forklift operator sits.
Forklifts could lift loads which weigh between one to five tons. Several types can be utilized to lift shipping containers and loads that are a lot heavier.
The tires of a forklift should be inspected and maintained frequently. The kinds of tires on various forklifts vary according to factors like for instance frequency of use, weight of the loads and ground surfaces. Every driver of a forklift must have access to replacement tires, a forklift jack and tire press.
Tire Maintenance Instructions
Perform tire inspections on a regular basis. Watch for indications of wear and damage to the tires. If the wear on the tire exceeds 40%, it should be replaced.
When purchasing tires, make sure that you are buying the correct kind - solid, pneumatic or polyurethane.
When the tire needs replacing, position the forklift jack under the tire and raise the forklift high enough that you could easily change the tires.
To remove the damaged tire, pull the tire from the rim using the tire press. Install the new tire and properly secure it. If you are changing more than one tire and you just have one jack, lower the forklift, and afterward reposition the jack at the next tire.
A repair company could offer on-site tire repair. If the tire is too big for both in-house and mobile tire presses, the damaged tire should be transported to a shop which has a stationary tire press.